product information is current as of publication date. the product conforms copyright ? 2006, 2007, pletronics inc. to specifications per the terms of the pletronics standard warranty. production processsing does not necessarily in clude testing of all parameters. -160 -140 -120 -100 -80 -60 -40 -20 0 20 40 60 80 100 120 140 160 -60 -40 -20 0 20 40 60 80 100 120 temperature ( o c) deviation (ppm) sm10t series miniature smd crystal november 2008 ? pletronics? sm10t series is a miniature surface mount crystal. ? package is ideal for automated surface mount assembly and reflow practices. ? tape and reel packaging ? 16 mhz to 60 mhz ? 2.5 x 3.2 mm 4 pad ? at cut fundamental crystal ? ideal for use in hand held consumer products pletronics inc. certifies this device is in accordance with the rohs 6/9 (2002/95/ec) and w eee (2002/96/ec) directives. pletronics inc. guarantees the device does not contain the following: cadmium, hexavalent chromium, lead, mercury, pbb?s, pbde?s weight of the device: 0.06 grams moisture sensitivity level: 1 as defined in j-std-020c second level interconnect code: e4 electrical specification : item min max unit condition frequency range 12 60 mhz calibration frequency tolerance 10 50 ppm at +25 o c + _ 3 o c, see part number for options frequency stability 3 150 ppm see part number for available options equivalent series resistance (esr) - 100 ohms to 30 mhz - 50 ohms above 30 mhz drive level - 100 w use 10 w for testing shunt capacitance (c0) - 5 pf pad to pad capacitance aging at 25 o c + _ 3 o c -5 +5 ppm /yr for the first year -2 +2 ppm /yr after the first year operating temperature range -40 +125 o c see part number for available options storage temperature range -55 +125 o c at cut crystal frequency versus temperature typical performance:
sm10t series miniature smd crystal november 2 008 www.pletronics.com 425-776-1880 2 part number: sm10t -18 -16.384m -20 e 1 l k -xx see chart below for available options internal code or blank highest specified operating temperature a = 40 o c g = 70 o c n = 100 o c b = 45 o c h = 75 o c p = 105 o c c = 50 o c j = 80 o c r = 110 o c d = 55 o c k = 85 o c s = 115 o c e = 60 o c l = 90 o c t = 120 o c f = 65 o c m = 95 o c u = 125 o c lowest specified operating temperature a = +10 o c f = -15 o c l = -40 o c b = +5 o c g = -20 o c m = -45 o c c = 0 o c h = -25 o c n = -50 o c d = -5 o c j = -30 o c p = -55 o c e = -10 o c k = -35 o c fundamental mode at cut crystal frequency stability see chart below calibration frequency tolerance (typ. values shown) 10 = + _ 10 ppm at 25 o c + _ 3 o c 15 = + _ 15 ppm at 25 o c + _ 3 o c 20 = + _ 20 ppm at 25 o c + _ 3 o c 30 = + _ 30 ppm at 25 o c + _ 3 o c (standard) frequency in mhz cload in pf parallel resonance from 06 to 32 pf or sr = series resonance model number available frequency stability versus temperature in ppm operating temperature range abcdefghjk code + _ 3.0 + _ 5.0 + _ 8.0 + _ 10 + _ 15 + _ 20 + _ 30 + _ 50 + _ 100 + _ 150 0 to +45 o c cb !!!!!!!!!! 0 to +50 o c cc !!!!!!!!!! 0 to +60 o c ce !!!!!!!!! 0 to +70 o c cg !!!!!! std !! -10 to +50 o c ec !!!!!!!!! -10 to +60 o c ee !!!!!!!!! -10 to +75 o c eh !!!!!!!! -20 to +70 o c gg !!!!!!!! -20 to +75 o c gh !!!!!!! -30 to +75 o c jh !!!!!!! -30 to +80 o c jj !!!!!!! -30 to +85 o c jk !!!!!! -35 to +80 o c kj !!!!!! -40 to +85 o c lk !!!!!! -40 to +90 o c ll !!!!!! -40 to +105 o c lp !!!!! -40 to +125 o c lu !!!
sm10t series miniature smd crystal november 2 008 www.pletronics.com 425-776-1880 3 legacy part number (not for new designs): sm10t b e -18 -23.45m -xx internal code or blank frequency in mhz cload in pf parallel resonance from 6 to 32 pf or sr = series resonance operating temperature range blank = 0 to + 70 o c (std e = -40 to +85 o c calibration tolerance / frequency stability blank = 30/50 (std) b = 30/30 series model reliability: environmental compliance parameter condition mechanical shock mil-std-883 method 2002, condition b vibration mil-std-883 method 2007, condition a solderability mil-std-883 method 2003 thermal shock mil-std-883 method 1011, condition a package labeling label is 1" x 2.6" (25.4mm x 66.7mm) label is 1" x 2.6" (25.4mm x 66.7mm) font is courier new font is arial bar code is 39-full ascii
sm10t series miniature smd crystal november 2 008 www.pletronics.com 425-776-1880 4 3 2 3 4 1 4 2 1 4 3 mechanical: inches mm a 0.098 + _ 0.004 2.5 + _ 0.15 b 0.126 + _ 0.004 3.2 + _ 0.15 c 0.028 max 0.7 max d 1 0.028 to 0.031 0.7 to 0.8 e 1 0.004 0.1 f 1 a - (2 * (d + e)) g 1 0.035 0.9 the chamfered pad may or may not be present and may be on any pad contacts : gold 11.8 inches 0.3 m minimum over nickel 50 to 350 inches 1.27 to 8.89 m h 1 0.047 1.2 not to scale 1 typical dimensions j 1 0.004 0.1 connection (top view): pad 2 and pad 4 are common and connected to the metal cover. they are not connected to the crystal. the crystal is symmetrical, there is no pad 1 preference. the part can be rotated 180 o when being assembled on the pcb and will still perform correctly. layout and application information ? trace lengths to the crystal should be kept as short as possible. ? the crystal connections are sensitive to noise. ? the package should be grounded for optimum performance, pad 2 and/or pad 4 connected to ground. marking ? marking consists of the frequency (may be truncated due to package size) and date code ? date code consists of month year (see codes below) ? orientation of marking may be mixed on the tape ? traceability of part is lost once removed from reel codes for date code (month year) code 6 7 8 9 0 1 2 year 2006 2007 2008 2009 2010 2011 2012 code a b c d e f g h j k l m month jan feb mar apr may jun jul aug sep oct nov dec
sm10t series miniature smd crystal november 2 008 www.pletronics.com 425-776-1880 5 260c maximum 10 seconds maximum 215c10c approximately 50 seconds allowed rate of temperature change maximum 4c per second 120 to 160 seconds 100 150 200 250 temperature (c) 175c10c reflow cycle (typical for lead free processing) the part may be reflowed 2 times without degradation. tape and reel: available for quantities of 250 to 3000 per reel (<1000 will be cut tape) constant dimensions table 1 tape size d0 d1 min e1 p0 p2 s1 min t max t1 max 8mm 1.5 +0.1 -0.0 1.0 1.75 + _0.1 4.0 + _0.1 2.0 + _0.05 0.6 0.25 0.1 12mm 1.5 16mm 1.5 2.0 + _0.1 24mm 1.5 variable dimensions table 2 tape size b1 max e2 min f p1 t2 max w max ao, bo & ko 8 mm 3.5 6.4 1.7 + _0.1 4.0 + _0.1 1.0 8.9 note 1 note 1: embossed cavity to conform to eia-481-b dimensions in mm not to scale reel dimensions a inches 7.0 10.0 13.0 mm 177.8 254.0 330.2 b inches 2.50 4.00 3.75 mm 63.5 101.6 95.3 tape width c mm 13.0 +0.5 / -0.2 dmm 8.4 +2.0 -0.0 8.4 +2.0 -0.0 8.4 +2.0 -0.0 8.0 reel dimensions may vary from the above
sm10t series miniature smd crystal november 2 008 www.pletronics.com 425-776-1880 6 important notice pletronics incorporated (ple) reserves the right to make corrections, improvements, modifications and other changes to this product at anytime. ple reserv es the right to discontinue any product or service without notice. customers are responsible for obtaining the latest relevant information before placing orders and should verify that such information is current and complete. all products are sold subject to ple?s terms and conditions of sale supplied at the time of order acknowledgment. ple warrants performance of this product to the specifications applicable at the time of sale in accordance with ple?s limited warranty. testing and other quality control techniques are used to the extent ple deems necessary to support this warranty. except where mandated by specific contractual documents, testing of all parameters of each product is not necessarily performed. ple assumes no liability for application assistance or customer product design. customers are responsible for their products and applications usi ng ple components. to minimize the risks associated with the customer products and applications, customers should provide adequate design and operating safeguards. ple products are not designed, intended, authorized or warranted to be suitable for use in life support applications, devices or systems or other critical applications that may involve potential risks of death, personal injury or severe property or environm ental damage. inclusion of ple products in such applications is understood to be fully at the risk of the customer. use of ple products in such applications requires the written approval of an appropriate ple officer. questions concerning potential risk applications should be directed to ple. ple does not warrant or represent that any license, either express or implied, is granted under any ple patent right, copyright, artwork or other intellectual pr operty right relating to any combination, machine or process which ple product or services are used. information published by ple regarding third-party products or services does not constitute a license from ple to use such products or services or a warranty or endorsement thereof. use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from ple under the patents or other intellectual property of ple. reproduction of information in ple data sheets or w eb site is permissible only if the reproduction is without alteration and is accompanied by associated warranties, conditions, limitations and notices. reproduction of this information with alteration is an unfair and deceptive business practice. ple is not responsible or liable for such altered documents. resale of ple products or services with statements different from or beyond the parameters stated by ple for that product or service voids all express and implied warranties for the associated ple product or service and is an unfair or deceptive business practice. ple is not responsible for any such statements. contacting pletronics inc. pletronics inc. tel: 425-776-1880 19013 36 th ave. west fax: 425-776-2760 lynnwood, wa 98036-5761 usa e-mail: ple-sales@pletronics.com url: www.pletronics.com copyright ? 2006, 2007, 2008, pletronics inc.
|
